Chain-driven segmented wheel dust collector discharge valve ash discharge valve electric

Chain-driven separator wheel dust collector discharge valve ash discharge valve electric, star-type ash discharge valves are divided into circular star-type ash discharge valves and square star-type ash discharge valves based on their external structure. Their advantages include: stable and reliable operation, uniform and accurate discharge, optimized structure, compact size, excellent sealing performance, easy maintenance, lightweight and energy-saving, long service life, etc. They are also indispensable equipment in dry material, dust, granular, and solid conveying systems. This valve is installed at the dust collector hopper for ash discharge,and is widely used in feeding and ash discharge systems in industries such as chemical, metallurgy, mining, cement, dust removal, environmental protection, power, and grain. Custom non-standard star-type ash discharge valves can also be manufactured according to customer requirements.

Usage precautions: 1. Before using the star-type discharge valve, check the quantity and type of lubricating oil in the reducer. Replace the oil after one month of operation, and then annually thereafter. 2. Connect the air source interface and check if it is blocked by foreign objects to ensure it is clean and unobstructed. 3. Before using the star-type discharge valve, ensure that the rotor rotates clockwise (viewed from the reducer's output shaft end, consistent with the arrow on the sprocket cover). 4. Before using the star-type discharge valve, open the sprocket cover to check the chain tension and inspect it regularly during operation. Apply suitable lubricating grease to the chain and sprocket. 5. Throughout the use of the discharge valve, adjust the pressure reducing valve so that the pressure at the seal is 0.05 MPa higher than the material pressure inside the valve body. The gas used should be oil-free, dry compressed air. 6. During the entire use of the star-type discharge valve, the air source for the seal must always be present. Only after confirming that the valve has stopped operating can the air source be shut off.Chain-driven separator wheel dust collector discharge valve ash discharge valve electric.